Wallpaper Paste and Tools

How to Install Your Custom Printed Wallpaper

Transforming your space with our custom wallcoverings is easy when you follow these simple steps and use our recommended Murabond tools and accessories. Designed for professional-quality results, these products ensure your wallpaper looks stunning and lasts beautifully.

1. Prepare the Wall

Start by making sure the wall surface is clean, dry, smooth and free from dust, grease, or loose paint. Fill and sand any imperfections, and wipe down to remove any residue.

For unstable or absorbent surfaces, such as new plaster or porous walls, use Murabond Primer to create the perfect base.

• Apply evenly with a roller or brush.

• Allow to dry fully before wallpaper installation.

• One 2.5kg tub typically covers 80–120m², depending on dilution and surface type.

2. Apply the Adhesive

Use Murabond Heavy Adhesive, specially formulated for hanging Digimura and other fabric-backed wallcoverings.

• Stir before use — it’s ready-mixed and easy to apply straight from the tub.

• Apply an even coat directly to the wall using a roller or brush.

• One 10kg tub covers up to 50m².

3. Hanging the Wallcovering

Position the first drop of wallpaper carefully against your marked plumb line.

• Smooth the wallpaper from the centre outwards using a Wallcovering Application Spatula.

  • The Protected Edge Spatula is ideal for gentle smoothing without damaging the print.

  • The Hard Edge Spatula offers firmer control for thicker or textured wallcoverings.

• Work methodically to remove any air bubbles and ensure full contact with the adhesive.

4. Trimming and Joining

For perfect seams and overlaps, use the Joint Cutter to trim clean, precise joins.

• This tool makes it easy to achieve a seamless finish between panels and includes ten spare blades for ongoing use.

• Use Wallcovering Scissors for detailed cuts around sockets, edges, or architectural features.

5. Finishing Touches

Use the Recyclable Plastic Strip during trimming or joint cutting to protect the wall surface from knife marks or scuffs.

Wipe away any excess paste with a damp sponge, taking care not to over-wet the surface.

Allow the wallcovering to dry naturally, avoiding direct heat or strong drafts.

Professional Tips

• Always check batch numbers before hanging to ensure colour consistency.

• Avoid stretching or pulling the material during installation.

• For the best results, maintain a room temperature of 15–25°C during application and drying.